{ "currentVersion": 10.91, "cimVersion": "2.9.0", "serviceDescription": "

The active fault data displayed here are from a variety of sources. It includes the New Zealand Active Faults Database (NZAFD) which comes in two versions - 1:250,000 scale (NZAFD-AF250) and a high-resolution scale (NZAFD-HighRes) \u2013 and is prepared by the Institute of Geological and Nuclear Sciences Limited (GNS Science). The active fault datasets also include Fault Avoidance Zones (FAZs) and Fault Awareness Areas (FAAs). The NZAFD-AF250 database covers New Zealand mainland, while the NZAFD-HighRes database, FAZs and FAAs are only available for restricted areas of New Zealand (updated periodically and without prior notification). If the FAZs are used to assist future land use planning, this should be done in accordance with the Ministry for the Environment \"Planning for Development on or Close to Active Faults\" (Kerr et al. 2003). The FAAs show where there may be a surface fault rupture hazard, but further work is needed to define a FAZ, and it is recommended that this dataset is used in conjunction with the guidelines developed by Barrell et al. (2015).<\/SPAN><\/P><\/DIV><\/DIV>", "mapName": "NZActiveFaultDatasets", "description": "

The active fault data displayed here are from a variety of sources. It includes the New Zealand Active Faults Database (NZAFD) which comes in two versions - 1:250,000 scale (NZAFD-AF250) and a high-resolution scale (NZAFD-HighRes) \u2013 and is prepared by the Institute of Geological and Nuclear Sciences Limited (GNS Science). The active fault datasets also include Fault Avoidance Zones (FAZs) and Fault Awareness Areas (FAAs). The NZAFD-AF250 database covers New Zealand mainland, while the NZAFD-HighRes database, FAZs and FAAs are only available for restricted areas of New Zealand (updated periodically and without prior notification). If the FAZs are used to assist future land use planning, this should be done in accordance with the Ministry for the Environment \"Planning for Development on or Close to Active Faults\" (Kerr et al. 2003). The FAAs show where there may be a surface fault rupture hazard, but further work is needed to define a FAZ, and it is recommended that this dataset is used in conjunction with the guidelines developed by Barrell et al. (2015).<\/SPAN><\/P><\/DIV><\/DIV><\/DIV>", "copyrightText": "GNS Science", "supportsDynamicLayers": true, "layers": [ { "id": 0, "name": "1:250 000 Active Faults", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 250000, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 1, "name": "1:250 000 Fault Sense", "parentLayerId": -1, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 250000, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 2, "name": "1:250 000 Recurrence Interval", "parentLayerId": -1, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 250000, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 3, "name": "1:250 000 Last Event", "parentLayerId": -1, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 250000, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 4, "name": "1:250 000 Slip Rate", "parentLayerId": -1, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 250000, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 5, "name": "1:250 000 Single Event Displacement", "parentLayerId": -1, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 250000, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 6, "name": "High Resolution Active Fault Traces", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 249999, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 7, "name": "Fault Avoidance Zones", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 100000, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 8, "name": "Fault Awareness Areas", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 100000, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true } ], "tables": [], "spatialReference": { "wkid": 2193, "latestWkid": 2193, "xyTolerance": 0.001, "zTolerance": 2, "mTolerance": 0.002, "falseX": -4020900, "falseY": 1900, "xyUnits": 4.504455473910538E8, "falseZ": 0, "zUnits": 1, "falseM": -100000, "mUnits": 10000 }, "singleFusedMapCache": false, "initialExtent": { "xmin": 411984.8473676301, "ymin": 4350305.238918673, "xmax": 2763498.9450323693, "ymax": 6395909.697181325, "spatialReference": { "wkid": 2193, "latestWkid": 2193, "xyTolerance": 0.001, "zTolerance": 2, "mTolerance": 0.002, "falseX": -4020900, "falseY": 1900, "xyUnits": 4.504455473910538E8, "falseZ": 0, "zUnits": 1, "falseM": -100000, "mUnits": 10000 } }, "fullExtent": { "xmin": 1090646.5917999996, "ymin": 4839302.7858, "xmax": 2084837.2006, "ymax": 5906912.1503, "spatialReference": { "wkid": 2193, "latestWkid": 2193, "xyTolerance": 0.001, "zTolerance": 2, "mTolerance": 0.002, "falseX": -4020900, "falseY": 1900, "xyUnits": 4.504455473910538E8, "falseZ": 0, "zUnits": 1, "falseM": -100000, "mUnits": 10000 } }, "datesInUnknownTimezone": false, "minScale": 0, "maxScale": 0, "units": "esriMeters", "supportedImageFormatTypes": "PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP", "documentInfo": { "Title": "NZActiveFaultDatasets", "Author": "", "Comments": "

The active fault data displayed here are from a variety of sources. It includes the New Zealand Active Faults Database (NZAFD) which comes in two versions - 1:250,000 scale (NZAFD-AF250) and a high-resolution scale (NZAFD-HighRes) \u2013 and is prepared by the Institute of Geological and Nuclear Sciences Limited (GNS Science). The active fault datasets also include Fault Avoidance Zones (FAZs) and Fault Awareness Areas (FAAs). The NZAFD-AF250 database covers New Zealand mainland, while the NZAFD-HighRes database, FAZs and FAAs are only available for restricted areas of New Zealand (updated periodically and without prior notification). If the FAZs are used to assist future land use planning, this should be done in accordance with the Ministry for the Environment \"Planning for Development on or Close to Active Faults\" (Kerr et al. 2003). The FAAs show where there may be a surface fault rupture hazard, but further work is needed to define a FAZ, and it is recommended that this dataset is used in conjunction with the guidelines developed by Barrell et al. (2015).<\/SPAN><\/P><\/DIV><\/DIV><\/DIV>", "Subject": "This service provides the current version of the Active Fault Datasets covering New Zealand at 1:250 000 scale, and selected regions at a higher resolution.", "Category": "", "AntialiasingMode": "Fast", "TextAntialiasingMode": "Force", "Version": "2.9.0", "Keywords": "Active Faults,1:250 000,High Resolution,Fault Avoidance Zones,Fault Awareness Areas" }, "supportsQueryDomains": true, "capabilities": "Map,Query,Data", "supportedQueryFormats": "JSON, geoJSON, PBF", "exportTilesAllowed": false, "referenceScale": 0.0, "datumTransformations": [ { "geoTransforms": [ { "wkid": 108460, "latestWkid": 1568, "transformForward": true, "name": "New_Zealand_1949_To_NZGD_2000_3_NTv2" } ] }, { "geoTransforms": [ { "wkid": 108460, "latestWkid": 1568, "transformForward": false, "name": "New_Zealand_1949_To_NZGD_2000_3_NTv2" } ] } ], "supportsDatumTransformation": true, "archivingInfo": {"supportsHistoricMoment": false}, "supportsClipping": true, "supportsSpatialFilter": true, "supportsTimeRelation": true, "supportsQueryDataElements": true, "maxRecordCount": 2000, "maxImageHeight": 4096, "maxImageWidth": 4096, "supportedExtensions": "WMSServer", "resampling": false }